Table of Contents
Advertisement
MINI PATEND
1.2 Secure the MINI PATEND
MINI
PATEND
Regardless of how you mount the MINI
PATEND
you must also use a safety wire.
Therefore you have to thread two safety wires through the two provided holes on the
backside of the fixture and connect it with the truss-support. Pay attention: It is
important to make a safe and proper fastening.
The mounting plates will be connected by two M6x10 and one M10x16 screws.
9
Elation Professionals
-
wwww.ElationLighting.com
Page
Advertisement
Table of Contents
