Mini Patend; Safety Regulations; Circumference And Interval (Rule-Of-Thumb) - Elation MiniPatend Instruction Manual

5
5 Maintenance and Cleaning the
It is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid
residues must not build up on or within the fixture. Otherwise the fixture's light-output will be
significantly reduced. Regular cleaning will not only ensure the maximum light-output but will
also allow the fixture to function reliably throughout its life.
A soft lint-free cloth moistened with any good glass cleaning fluid is recommended,
under no circumstances should alcohol or solvents be used!
The inside optical system should be maintained only by authorized persons. Please contact
your local dealer.

5.1 Safety Regulations

• Disconnect the main power supply!
• Wait min. 20 minutes after the last operation to cool down the fixture.
• Before you put the MINI PATEND
your retina can be hurt!

5.2 Circumference and Interval (rule-of-thumb)

The contamination of the fixture depends on the environment. Therefore no general
guidelines can be given. From this it follows that the intervals are only suggestions
from our practice experience.
Position
Outside optic
Color filter
Gobos
Glass gobos
Prism
Dimmer/Shutter
Inside lens
Fan and air channel
Reflector
Lamp
Moveable parts
Elation Professionals

MINI PATEND

MINI PATEND
MINI PATEND
back into operation close the casing, otherwise
Interval In this way
Weekly Soft cloth and glass cleaning fluid
Monthly Soft cloth and glass cleaning fluid
Yearly Vacuum cleaner, airbrush, etc.
Monthly Soft cloth and glass cleaning fluid
Monthly Soft cloth and glass cleaning fluid
Yearly Vacuum cleaner, airbrush, etc.
Monthly Soft cloth no glass cleaning fluid
Monthly Vacuum cleaner, airbrush, etc.
Never
Never
Yearly Suitable fatty oil
- wwww.ElationLighting.com
23
Page