Get Status Info; Set Device Name; Set/Reset Password - Symmetricom ND-SERIES User Manual

Enter the Number or Alpha Letter corresponding to the command desired and press the enter key.
Current configuration or default answers are displayed in brackets. Depressing the 'Enter' will retain
the current entry/default.

Get Status Info

Select this menu option to query the device for parameters relating to the clock's current status.
This includes information regarding the clocks reference to UTC, local time, displayed time,
whether it is synchronized, and its NTP server.

Set Device Name

To set the device name, select this menu option. Enter the desired device name.

Set/Reset Password

To set, change or remove the password, select this option. Bear in mind that a lost/forgotten password
cannot be recovered [unless a reset to factory default settings is performed].
[Note: the factory default password is: "public"]
[Hint: To remove password protection for a clock, select the Set Password command. You will be
prompted to enter the old password. Enter the old password. Do not enter anything into the New
Password or Confirm Password fields. Click OK to save. Upon you next session, you will not be
prompted for a password for the clock.]
®
ND Clocks User Manual - Rev 2.0.1 Sep-08 25 Symmetricom , Inc.