Performance; Model Definition; Interface; Printer Codes - KERN YKN-01 Operating Instructions Manual

SPRT
Chapter 1 Feature and Performance

1.1 Model definition

SP-T printers have five kinds of print head model and two kinds of
interface. They are defined as:
SP -T
You can compare your SP-T micro printer with the above definition, so as
to correctly read and understand the contents in this manual.

1.2 Interface

SP-T series have serial and parallel two kinds of interface, parallel
interface is compatible with CENTRONICS and serial interface is
compatible with RS-232C. The two kinds of interface are connected to the
host both by using standard 25-pin D model socket and 25-pin cable.
The parallel interface socket is D model 25-pin male socket; the serial is D
model 25-pin female socket. The host that has D model 25-pin standard
output socket such as IBM PC and its compatible computer and LAPTOP
portable computer etc, can use 25-pin standard cable to connect with
directly. The host that hasn't standard output socket such as China learning
machine etc, can use special cable (see Appendix 5) to connect with. The
details please see the printer cable connection in Chapter 3 and Appendix
5.

1.3 Printer Codes

SP-T printers offer 448 kinds of internal characters, including English,
Greek, German, French, Japanese katakana and GB Chinese character
library level I, II, a large number of mathematics symbols, special-purpose
symbols and various kinds of graphic and curving symbols. All the
characters are composed by two character sets (see Appendix 1), chosen by
the host's programs through control commands. Character size is 5 ×7
dots, graphic character size is 6×8 dots, through certain programs, also
( )
Product Serial Number: A, B,...........
Interface Mode: P ( Parallel), S (Serial)
Speed: H(High), L(Low)
Character number of each line:16, 24,
40, 42
Structure Mode: T
Trademark
３