Advertisement
Insert the mast roof mounting bracket in
the dia. 42 hole bored in the roof, making
sure you apply a layer of silicone under
the ring nut.
Secure the pipe lead to the roof using
the ring nut and its wedge-shaped spacer.
Caution: the antenna must be in horizontal
position. The wedge-shaped spacer is
used to set the antenna in the horizontal
position even if the roof is inclined.
3
Fasten the ring nut using self-tapping
screws. Place the rubber gasket over the
ring nut. ( Screws not supplied )
Lock the collar on the wedge spacer
by applying the 2 screws (not supplied).
Advertisement
