Advertisement
1) Connect the coaxial cable coming from the mast handle to the ANT connector
of the DSF80E device
2) Plug the REC connector of the DSF80 in the LNB connector of your satellite
receiver via the supplied coaxial cable.
3) Connect the 12Vdc input cable to the 12Vdc connector of the DSF80E device.
Plug the other end of the cable into the vehicle battery or a 12Vdc power outlet.
(stabilised)
12Vdc
Note: The USB port can
only be used by
technical personnel to
carry out software
updates.
SATELLITE RECEIVER
9
Advertisement
