Syslog - D-Link DVG-5802S User Manual

Section 3 - Configuration
The Broadband Router keeps a running log of events and activities occurring on the Router. You may send these logs
to a SysLog server on your network.
Enable Logging
Check this box to send the router logs to a
to SysLog
SysLog Server.
Server:
SysLog Server:
The IP Address and Port of the SysLog server
that will be used to send the logs.
Syslog Level:
0 Emergency: system is unusable
1 Alert: action must be taken immediately
 Critical: critical conditions Critical: critical conditions Critical: critical conditions
3 Error: error conditions
4 Warning: warning conditions
5 Notice: normal but significant condition
6 Informational: informational messages
7 Debug: debug-level messages.
Syslog Facility:
Numerical Facility Code
0 kernel messages kernel messages kernel messages
1 user-level messages user-level messages user-level messages
 mail system mail system mail system
3 system daemons system daemons system daemons
4 security/authorization messages (note 1) security/authorization messages (note 1) security/authorization messages (note 1)
5 messages generated internally by syslogd messages generated internally by syslogd messages generated internally by syslogd
6 line printer subsystem line printer subsystem line printer subsystem
7 network news subsystem network news subsystem network news subsystem
8 UUCP subsystem UUCP subsystem UUCP subsystem
9 clock daemon (note ) clock daemon (note ) clock daemon (note )
10 security/authorization messages (note 1) security/authorization messages (note 1) security/authorization messages (note 1)
11 FTP daemon FTP daemon FTP daemon
It is followed up the RFC3164. The Facilities and Severities of the messages are numerically coded with decimal values. Some of the
operating system daemons and processes have been assigned Facility values. Processes and daemons that have not been explicitly
assigned a Facility may use any of the "local use" facilities or they may use the "user-level" Facility. Those Facilities that have been
designated are with their numerical code values.
D-Link DVG-580S User Manual

SysLog

DVG-5802S
1 NTP subsystem
13 log audit (note 1)
14 log alert (note 1)
15 clock daemon (note )
16 local use 0 (local0)
17 local use 1 (local1)
18 local use  (local)
19 local use 3 (local3)
0 local use 4 (local4)
1 local use 5 (local5)
 local use 6 (local6)
3 local use 7 (local7)
Note 1 - Various operating systems have been
found to utilize Facilities 4, 10, 13 and 14 for
security/authorization, audit, and alert messages
which seem to be similar.
Note 2 - Various operating systems have been
found to utilize both Facilities 9 and 15 for clock
(cron/at) messages.
54