D-Link DVG-5802S User Manual page 29

Section 3 - Configuration
Dial plan: Enter a valid dial plan for your local environment (this
is typically preconfigured by your Service Provider).
Interdigit Timeout:
Emergency
Set the emergency number, i.e. 911
Dialplan:
Enable/Disable the Emergency CPC function. While
Enable
Emergency CPC:
dialed number is emergency number user defined,
user will not able to terminate the emergency call (i.e.
911). If user go on hook the phone, it will ring back to
connect again. And the emergency dialplan will also
kick outgoing call if the number is matched.
Enable/ Disable the Call Waiting feature. This feature
Enable Call
Waiting:
lets you accept multiple calls simultaneously, placing
the calls currently unattended to on hold.
Enable/ Disable the Hook Flash button functionality
Service side Hook
Flash:
on the phone.
Enable/ Disable the Call Forward feature and set your
Enable Call
forward calls to the number defined in unconditional
Forward:
/ Busy / No Answer selection.
Unconditional Call Forward: Input the unconditional
call forward number.
Busy Call Forward: Input the Busy call forward
number.
No Answer Call Forward: Input the No Answer call
forward number.
SIP INFO body Set whether SIP INFO body type should be DTMF-
type:
Relay or Telephone-Event. Default is DTMF-
Relay. This determines the format of SIP INFO
sent through a session. Please refer to RFC 833
to gain an understanding of the IETF specified
recommendations.
D-Link DVG-580S User Manual 9