Table of Contents
Advertisement
Section 3 - Configuration
Choose LTP (Layer Tunneling Protocol) if your ISP uses a LTP connection. Your ISP will provide you with a
username and password. This option is typically used for DSL services.
Address Mode:
Select Static if your ISP assigned you the IP address,
subnet mask, gateway, and DNS server addresses. In
most cases, select Dynamic.
L2TP IP Address:
Enter the LTP IP address supplied by your ISP (Static
only).
L2TP Subnet Mask:
Enter the Subnet Mask supplied by your ISP (Static
only).
L2TP Gateway:
Enter the Gateway IP Address provided by your ISP.
L2TP Server IP:
Enter the Server IP provided by your ISP (optional).
Username:
Enter your LTP username.
Password:
Enter your LTP password and then retype the password
in the next box.
Reconnect Mode:
Select either Always-on, On-Demand, or Manual.
Maximum Idle
Enter a maximum idle time during which the Internet
Time:
connection is maintained during inactivity. To disable this
feature, enable Auto-reconnect.
DNS Servers:
Enter the Primary and Secondary DNS Server Addresses
(Static LTP only).
D-Link DVG-580S User Manual
Internet Setup
L2TP
DVG-5802S
0
Advertisement
Table of Contents
