Table of Contents
Advertisement
Section 3 - Configuration
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with
a username and password. This option is typically used for DSL services.
Address Mode:
Select Static if your ISP assigned you the IP address,
subnet mask, gateway, and DNS server addresses. In
most cases, select Dynamic.
PPTP IP
Enter the IP address (Static PPTP only).
Address:
Enter the Primary and Secondary DNS Server Addresses
PPTP Subnet
(Static PPTP only).
Mask:
PPTP Gateway:
Enter the Gateway IP Address provided by your ISP.
PPTP Server IP:
Enter the Server IP provided by your ISP (optional).
Username:
Enter your PPTP username.
Password:
Enter your PPTP password and then retype the password
in the next box.
Reconnect Mode:
Select either Always-on, On-Demand, or Manual.
Maximum Idle
Enter a maximum idle time during which the Internet
Time:
connection is maintained during inactivity. To disable this
feature, enable Auto-reconnect.
DNS Servers:
The DNS server information will be supplied by your ISP
(Internet Service Provider.)
D-Link DVG-580S User Manual
Internet Setup
PPTP
DVG-5802S
18
Advertisement
Table of Contents
