Teeter Hang Ups EP-550 Assembly Information page 11

Figure 13
Figure 14
Step 7
Attach the Tether Strap (F5-1007) to Limit the Degree of Rotation
• Hook the clip at the end of the tether strap to the loop at the base of the table bed (Figure 13) to limit your
degree of rotation.
• Tighten or loosen the strap to restrict or extend your angle of rotation.
Attach the Head Pillow
• Attach the Head Pillow by securing the Velcro straps through the holes in the Table Bed – the position of the
pillow can be adjusted depending on the user (Figure 14).