Cd-Rom Installation - IC Realtime NVR11 Series User Manual

③
Please pull the handle up when you are
inputing the HDD box in case the the
handle collides with the front panel

3.4 CD-ROM Installation

Please follow the steps listed below.
① Open top cover and then remove the
HDD bracket
③ Fix the CD-ROM bracket at the HDD
bracket.
④
After put the HDD box to the SATA
board, put the handle back..
② Take off the bottom of the HDD bracket and
CD-ROM bracket.
④ Install a pair of the CD-ROM bracket. Please make
sure the reverse side is secure too.
71