Table of Contents
Advertisement
Day/night. It is to set device color and the B/W mode switch. The default setup is auto.
Color: Device outputs the color video.
Auto: Device auto select to output the color or the B/W video according to the device feature (The
general bright of the video or there is IR light or not.)
B/W: The device outputs the black and white video.
Sensor: It is to set when there is peripheral connected IR lig ht.
Please note some non-IR series product support sensor input function.
4.4.4 Channel Name
From main menu->Setting->Camera-Channel name, you can see an interface shown as in Figure 4-16.
It is to modify channel name. It max supports 31-character.
Please note you can only modify the channel name of the connected network camera.
Figure 4-15
95
Advertisement
Table of Contents
