Table of Contents
Advertisement
5.8.3.1.3 Tampering
The tampering interface is shown as in Figure 5-60.
After analysis video, system can generate a tampering alarm when the detected moving signal reached
the sensitivity you set here.
For detailed setups, please refer to chapter 5.8.3.1.1 motion detect for detailed information.
5.8.3.2 Alarm
Before operation, please make sure you have properly connected alarm devices such as buzzer. The
input mode includes local alarm and network alarm.
5.8.3.2.1 Local Alarm
The local alarm interface is shown as in Figure 5-61. It refers to alarm from the local device.
Figure 5-59
Figure 5-60
234
Advertisement
Table of Contents
