Table of Contents
Advertisement
Click Device search button, you can view the searched IP addresses at the top pane of the interface.
Double click an IP address or check one IP address and then click Add button, you can add current
device to the bottom pane of the interface. System supports batch add function.
Click Manual Add button, you can add a device directly. Here you can set TCP/UPD/auto connection
mode. The default setup is TCP. See Figure 4-13.
Important
Please note the manual add function is for Dahua, Panasonic, Sony, Dynacolor, Samsung, AXIS, Arecont,
ONVIF and Custom. When the type is the custom, you can just input URL address, user name and
password connect to the network camera without considering network camera manufacture. Please
contact your network camera manufacturer for the URL address.
4.4.2 Short-Cut Menu
In the preview interface, for the channel of no IPC connection, you can click the icon "+" in the centre of
the interface to quickly go to the Remote Device interface. See Figure 4-14.
Figure 4-13
Figure 4-14
93
Advertisement
Table of Contents
