Table of Contents
Advertisement
Port Name
+12V
eSATA
RS-232
HDMI
VGA
2.2.14 NVR70 Series
The NVR70 series rear panel is shown as below. See Figure 2-31.
Please refer to the following sheet for detailed information.
Port Name
Power switch
Power
input
port
+12V power output port. It can provide the power to
/
some peripheral devices such as the camera or the
alarm device. Please note the supplying power
shall be below 1A.
Network port
10M/100M/1000Mbps self-adaptive Ethernet port.
Connect to the network cable.
eSATA port
External SATA port. It can connect to the device of
the SATA port. Please jump the HDD when there is
peripheral connected HDD.
USB2.0 port
USB2.0 port. Connect to mouse, USB storage
device, USB burner and etc.
RS232
debug
It is for general COM debug to configure IP address
COM.
or transfer transparent COM data.
High definition audio and video signal output port. It
transmits uncompressed high definition video and
High
Definition
multiple-channel data to the HDMI port of the
Media Interface
display device. HDMI version is 1.3. The two HDMI
ports to output video from different video sources.
VGA video output
VGA video output port. Output analog video signal.
port
It can connect to the monitor to view analog video.
Figure 2-31
/
Power on-off button
/
Input AC 100~240V.
Function
Function
56
Advertisement
Table of Contents
