Table of Contents
Advertisement
Status indication
light
Power indication
light
Record light
HDD
abnormal
status
indictor
light
2.1.7 NVR70/70-R Series
The front panel is shown as in Figure 2-7.
Please refer to the following sheet for front panel button information.
SN
Name
Power button
1
System
2
Indication light
Alarm
3
light
Network indication
4
light
Status
The light is on if device operates properly.
POWER
Power indication light
1-16
It becomes on when system is recording.
It becomes on when there is no HDD, HDD error occurs, or
HDD
HDD is full.
Icon
HDD
indication
Figure 2-7
Press it once to turn on the device.
Press it for a long time to turn off the device (Usually
we do not recommend).
Press power button for a long time or pull out the
power cable may result in device auto restart.
The blue light flashes when system is reading or
writing the system HDD.
In the system HDD, there are device important
configuration file, factory default configuration file,
device initial boot up data.
The alarm indication light becomes on once an alarm
occurred. It becomes on via the software detection.
The alarm includes local alarm, no disk and etc.
The network indication light is blue and it flashes
when you connect the device to the network.
Function
33
Advertisement
Table of Contents
