GPS Signal Strong
Zone
Restriction
Motors will not start.
If the aircraft enters the
No-fly Zone
restricted area in A-mode,
but is switched to P-mode,
the aircraft will automatically
descend, land, and stop its
motors.
If the aircraft enters the
Restricted-
restricted area in A-mode, but
altitude flight
is switched to P-mode, it will
zone
descend to an appropriate
altitude and hover 15 feet
below the altitude limit.
Warning zone
No flight restriction applies, but
there will be a warning .
Free zone
No restrictions.
Semi-automatic descent: All stick commands are available except the throttle stick command
during the descent and landing process. Motors will stop automatically after landing.
When flying in a safety zone, the aircraft's status indicator will blink red rapidly and continue
for 3 seconds, then switch to indicate current flying status and continue for 5 seconds at which
point it will switch back to blinking red.
For safety reasons, please do not fly close to airports, highways, railway stations, railway lines,
city centers, or other sensitive areas. Fly the aircraft only within your line of sight.
Blinking Green
DJI Pilot App Prompt
Warning: You are in a No-fly
zone. Take off prohibited.
Warning: You are in a no-fly zone.
Automatic landing has begun.
R1: Warning: You are in a
restricted zone. Descending to
safe altitude.
R2: Warning: You are in a
restricted zone. Maximum flight
altitude is restricted to between
20m and 500m. Fly cautiously.
Warning: You are approaching a
restricted zone, Fly cautiously.
None.
Phantom 3 Advanced User Manual
Aircraft
Status
Indicator
Red flashing
None.
©
2015 DJI. All Rights Reserved.
43
Need help?
Do you have a question about the Phantom 3 Advanced and is the answer not in the manual?