Yamaha TF5 User Manual page 47

GATE REVERB, REVERSE GATE
One-input, two-output early reflection with gate, and an early reflection with reverse gate.
Parameter
Type Type-A, Type-B
Room Size 0.1 - 20.0
Liveness 0 - 10
Initial Delay 1.0ms - 500.0ms
Diffusion 0 - 10
Density 0% - 100%
ER Number 1 - 19
Feedback Gain -99% - 99%
High Ratio 0.1 - 1.0
HPF Thru, 21.2Hz - 8.00kHz
LPF 50.0Hz - 16.0kHz, Thru
CHORUS
Two-input, two-output chorus effect.
Parameter
Frequency 0.05Hz - 10.00Hz
AM Depth 0% - 100%
PM Depth 0% - 100%
MOD. Delay 1.0ms - 500.0ms
Sync Off, On
Note
FLANGE
Two-input, two-output flanger effect.
Parameter
Frequency 0.05Hz - 10.00Hz
Depth 0% - 100%
MOD. Delay 1.0ms - 500.0ms
Feedback Gain -99% - 99%
Sync Off, On
Note
SYMPHONIC
Two-input, two-output symphonic effect.
Parameter
Frequency 0.05Hz - 10.00Hz
Depth 0% - 100%
MOD. Delay 1.0ms - 500.0ms
Sync Off, On
Note
PHASER
Two-input, two-output 16-stage phase-shift effect.
Parameter
Frequency 0.05Hz - 10.00Hz
Depth 0% - 100%
Feedback Gain -99% - 99%
Offset 0 - 100
Phase 0° - 355°
Stage 2 - 16
HPF Thru, 21.2Hz - 8.00kHz
LPF 50.0Hz - 16.0kHz, Thru
Sync Off, On
Note
Range
Range
-
Range
-
Range
-
Range
-
Early reflection type.
Room size; determines interval between early reflections.
Decay of the early reflections
Delay before the early reflection.
Width of the reflections in the stereo field.
Density of the reflections.
Number of reflections.
Amount of feedback.
Amount of high-frequency feedback.
High-pass filter cutoff frequency.
Low-pass filter cutoff frequency.
Modulation speed
Depth of amplitude modulation.
Depth of pitch modulation.
Delay time of modulation.
Parameter tempo sync.
Value used to calculate the frequency based on the tempo.
Modulation speed
Depth of modulation.
Delay time of modulation.
Amount of feedback.
Parameter tempo sync.
Value used to calculate the frequency based on the tempo.
Modulation speed
Depth of modulation.
Delay time of modulation.
Parameter tempo sync.
Value used to calculate the frequency based on the tempo.
Modulation speed
Depth of modulation.
Amount of feedback.
Offset of the phase shifted frequency.
Left/right balance of modulation.
Number of phase shift stages.
High-pass filter cutoff frequency.
Low-pass filter cutoff frequency.
Parameter tempo sync.
Value used to calculate the frequency based on the tempo.
- 47 -
Main display area
Description
Description
Description
Description
Description
TF Editor
User Guide