Yamaha TF5 User Manual page 37

6
EQ output level meter
Displays the EQ output level.
7
EQ graph
Displays the parameter settings of the EQ and filter. As you adjust the settings of each band, the results are reflected in the graph.
When using 1-knob EQ mode, you can adjust the 1-knob level slider.
When using manual mode, you can drag the handles displayed in the graph to adjust the corresponding settings. When HPF
is turned on, you can drag the HPF handle to adjust the cutoff frequency. You can also adjust HPF independently when using
the Intensity type for 1-knob EQ mode.
<1-knob EQ mode>
If you double-click an area of the graph where there is no parameter, a keyboard is displayed. This is useful for understanding the
relationship between sound range and frequency.
How does 1-knob EQ mode work?
1-knob EQ mode allows you to adjust several parameters at once with just one operation. It makes EQ adjustment quick and easy.
The console contains Presets that are configured for a variety of instruments. You can use 1-knob EQ mode to adjust the EQ
settings that are saved in Presets without disturbing the overall balance of your mix.
You can even configure EQ settings using manual mode, then switch to 1-knob EQ mode and use the Intensity type to adjust the
amount of EQ applied to the channel. In this case you can adjust from 0% (no EQ applied) to 50% (the EQ settings you made using
manual mode) and 100% (increased intensity of the EQ settings you made using manual mode). This makes it very easy to fine-
tune your EQ settings with just one operation.
If 1-knob EQ mode type is set to Vocal or Loudness, you can adjust the EQ between 0% (no EQ applied) and 100% (maximum EQ
applied).
Setting LPF
The SUB channel can use the LPF to cut high frequencies independent of the EQ, ideal for adjusting the signal sent to a sub-woofer.
Drag to adjust
- 37 -
Main display area
<Manual mode>
User Guide
TF Editor