Yamaha TF5 User Manual page 54

ST IN 1L-ST IN 2R
1
Channel name
Click to display the CH NAME screen
Click to display information for a different channel.
2
Recall Safe button
Turns Recall Safe on and off for the corresponding channel.
You can display the RECALL SAFE screen by clicking the jump button in the right corner of the Recall Safe button.
3
Input source indicator
Displays the input channel's input source. You can select the input source on the INPUT screen.
4
Mute Safe button
Click to temporarily exclude the selected channel from the input mute group.
If you mute the input mute group, any channels in that group that have mute safe enabled will not be muted.
5
HA/EQ/GATE/COMP boxes
Click to display the configuration screen for the corresponding feature.
You can click the EQ button displayed here to turn EQ on and off.
HA box: Displays the INPUT screen
EQ box: Displays the EQ screen
6
Channel on/off button
Turns the selected channel on and off.
7
Channel pan slider
Adjusts the pan for the selected channel.
8
FX1/FX2 boxes
Displays the effect type.
When selected, you can use the mouse wheel to adjust the effects send level. You can also display the corresponding effect's
configuration screen by clicking again.
Each box displays the amount of signal from the selected channel that is sent to the corresponding effects module.
Send level, the selected channel's fader level, and the actual send level grouped with the DCA is displayed in the triangular bar.
The information displayed here indicates whether the signal sent to the effects module is the pre-fader or post-fader signal.
Pre-fader signal is displayed in green; post-fader signal is displayed in gray.
9
SEND TO AUX box
Touch when selected to display the SEND TO AUX screen.
Displays the amount of signal from the selected channel that is sent to each AUX bus.
Send level, the selected channel's fader level, and the actual send level grouped with the DCA is displayed in the horizontal
bar.
The information displayed here indicates whether the signal sent to the AUX bus is the pre-fader or post-fader signal. Pre-
fader signal is displayed in green; post-fader signal is displayed in gray.
(page 62).
(page 34).
(page 36).
- 54 -
Main display area
User Guide
TF Editor