Table of Contents
Advertisement
Confirmatory indications
CANNOT RECORD.
CHECK CARD.
THIS CARD CANNOT
RECORD IN VIDEO MODE.
CARD LOCKED.
SCENE NUMBER IS FULL.
PROGRAM NUMBER IS
FULL.
NO CARD.
CARD DOOR OPENED.
CARD FULL.
UNPLAYABLE CARD.
FILE LOCKED.
NOW ACCESSING.
PLEASE DO NOT REMOVE
CARD.
NO DATA.
CARD ERROR.
PLEASE REFORMAT.
CANNOT SET DPOF.
CONTROL INFORMATION
DIFFER.
CANNOT USE THIS CARD IN
VIDEO MODE.
SCENE IN PROTECTED
PROGRAM OR PLAYLIST.
LOW BATTERY.
PUSH THE RESET SWITCH.
Data writing to the SD card has failed.
This card is not compatible or it cannot be recognized by
the unit.
An 8 MB or 16 MB SD card has been inserted in motion
picture recording mode.
The write protection switch on the SD card is set to
[LOCK]. (P17)
The number of still pictures or motion picture scenes
(program) that can be recorded on 1 card is exceeded.
Delete unnecessary scenes or insert a new SD card.
(P16, 66)
No SD card is inserted. (P16)
The unit is being operated with the card slot cover open.
The SD card is full. No further data can be recorded.
Delete motion picture files or insert a new SD card.
(P16, 66)
The data on the SD card cannot be played back.
You are attempting to erase protected scenes. (P68)
Data processing is now underway. Close the card slot
cover and wait a few moments.
There are not any still pictures and motion pictures
recorded on the SD card.
SD card formatting has failed.
Writing of the DPOF setting to the SD card has failed.
The data on the card differs from the Video Mode
standard. Save the data on a PC and then format the card
before use.
You are attempting to erase a protected scene or a scene
in a play list created on another device.
The battery is low. Recharge it. (P19)
An irregularity in the equipment has been detected.
Remove the SD card then press the reset switch to restart
the unit. (P106)
99
VQT0X49
Advertisement
Table of Contents
