Table of Contents
Advertisement
Indications (continued)
CHANGE TO MANUAL
MODE.
CANCEL NIGHT VIEW
MODE.
TURN OFF POWER LCD.
NO INK IN PRINTER.
NO PAPER IN PRINTER.
PRINTER ERROR.
PLEASE CONNECT AC
ADAPTOR AND BATTERY.
CHANGE MODE TO USE
USB.
DISCONNECT USB CABLE.
100
VQT0X49
You have set the [AUTO/MANUAL/FOCUS] switch to
[AUTO] and are attempting to set [SCENE MODE] from
the menu screen.
You are attempting to set [SCENE MODE] from the menu
screen while colour night view is set. (P46)
You are attempting to set [LCD AI] from the menu screen
when the [POWER LCD] button has been pressed to
brighten the LCD monitor.
Check the connected printer.
The AC adaptor has not been connected or the battery
has not been inserted while the unit is connected to the
PC in PC Connection mode.
The USB cable is connected in the motion picture
playback mode.
Another mode has been selected from the PC Connection
mode while the USB cable was still connected.
Disconnect the USB cable and ensure that the battery has
been inserted in the unit. Then connect the AC adaptor
and the USB cable.
This indication appears if the USB cable remains
connected for more than 5 minutes when a printer or the
PC is connected.
The unit's power cannot be turned off which the unit is
connected to the PC.
Advertisement
Table of Contents
