Table of Contents
Advertisement
∫ Deleting scenes one at a time
¬ Rotate the mode dial to select
1
DELETE SCENE?
SETUP
ENTER
2
DELETE SCENE?
SETUP
ENTER
∫ Deleting still picture files recorded on an SD card by other equipment
A still picture file (other than JPEG) that cannot be played back on this unit may be
erased.
≥ Do not open the card slot cover while
deleting. The deletion will stop.
≥ Scenes displayed as thumbnails in
shades of blue and white cannot be
deleted. (P106)
≥ Scenes that are locked cannot be
deleted.
≥ If the write protection switch on an SD
card is set to [LOCK], the scenes on the
card cannot be deleted. (P17)
≥ When "CARD FULL." is shown during
recording, delete unnecessary scenes. If
there are no scenes to be deleted, it
means that the memory is full so insert a
new SD card.
YES
NO
YES
NO
or
.
Press the [
] button during
playback.
When the confirmation message
appears, use the cursor button to
select [YES], then press the button in
the centre.
≥ To stop deleting, select [NO].
≥ In case of [ALL], the deletion may take
time if there are many scenes on the SD
card.
≥ When [ALL] is selected in the motion
picture playback mode, the following
scenes will be deleted.
– When [PLAY MODE] is set to
[VIEW ALL]:
All the scenes on the SD card
– When [PLAY MODE] is set to
[BY DATE]:
All the scenes selected by date
≥ Do not turn off this unit while deleting.
≥ When you delete scenes, use a battery
with sufficient battery power or use the
AC adaptor.
≥ If scenes conforming to DCF standard
are deleted, all the data related to the
scenes will be deleted.
67
VQT0X49
Advertisement
Table of Contents
