SDR-T76GA SDR-T76GC VOL.1 Colours (K)..Black Type (N)..Gold Type (SDR-S71GC) (S)..Silver Type (SDR-S70P/PC, S71P/GC/GA/GN/GK, T76GC) (R)..Red Type (SDR-S70P/PC/EG/EF/EC/EP/EB/EE, S71P/GC/GA/GN, T71PU, T76GC) (P)..Pink Type (SDR-S71GC/GA) (H)..Gray Type (SDR-S70EB) TABLE OF CONTENTS PAGE PAGE 1 Safety Precautions -----------------------------------------------3 11.2. What is the factory settings?-------------------------- 36 1.1.
1 Safety Precautions 1.1. General Guidelines 1. IMPORTANT SAFETY NOTICE There are special components used in this equipment which are important for safety. These parts are marked by in the Schematic Diagrams, Circuit Board Layout, Exploded Views and Replacement Parts List. It is essential that these critical parts should be replaced with manufacturer's specified parts to prevent X-RADIATION, shock fire, or other hazards.
2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatic Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatic Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semi- conductor "chip"...
2.2. Service caution based on legal restrictions 2.2.1. General description about Lead Free Solder (PbF) The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this equipment in considering the globally environmental conservation. The normal solder is the alloy of tin (Sn) and lead (Pb).
A replacement fuse cover can be purchased from your local Panasonic Dealer. If the fitted moulded plug is unsuitable for the socket outlet in your home then the fuse should be removed and the plug cut off and disposed of safety.
Note: The lithium battery is a critical component. (Type No.: ML-614S/DN Manufactured by Energy Company, Panasonic Corporation) It must never be subjected to excessive heat or discharge. It must therefore only be fitted in equipment designed specifically for its use.
Note: Above caution is applicable for a battery pack which is for SDR-S70/S71/T70/T71/T76 series, as well. 2.5. How to Recycle the Lithium Battery (U.S. Only)
3 Service Navigation 3.1. Service Information This service manual contains technical information which will allow service personnel's to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, this information will be followed by supplement service manual to be filed with original service manual.
3.2. How to Define the Model Suffix (NTSC or PAL model) There are seven kinds of SDR-S70/S71/T70/T71/T76, regardless of the colours. • a) SDR-S70P, SDR-S7IP, SDR-T70P • b) SDR-S70PC, SDR-T70PC • c) SDR-S70EB/EC/EF/EG/EP, SDR-T70EB/EC/EF/EG/EP • d) SDR-S71GA/GN, SDR-T76GA • e) SDR-S70EE, SDR-T70EE •...
5 Location of Controls and Components Followings are the Location of Controls and Components for SDR-S70P/PC, S71P, T70P/PC, H100/P/PC as a sample. For other models, refer to each Operating Instructions.
6 Service Mode Note: The screens of the service mode are for SDR-T71PU. For other models, refer to each screen of the service mode. 1. Indication method of the service menu Set the mode switch " Recording" mode. 2. While keep pressing the "Intelligent auto/Manual" button and "Menu" button, hold left the Zoom Lever towards to "[ W ]" posi- tion for more than 3 seconds until the top screen of the Service Menu being displayed.
6.1. eSD Self Check 1. Select [ 3 ] eSD self check. Operation specifications Indication contents • eSD self check result display Display the eSD self check result information. Displays other than "OK" are abnormalities of eSD. Push the menu button to end the service mode, and then POWER OFF. 6.2.
6.3. Power ON Self Check Result Display 1. Select [ 5 ] Power ON self check result display. Operation specifications Indication contents • Power ON self check result display Function to diagnose correct function of the device and interface between devices result display. Display the following communication test result.
8 Disassembly and Assembly Instructions 8.1. Disassembly Flow Chart This flow chart indicates the disassembly steps the cabinet parts and P.C.B. Unit in order to access to be serviced. When reinstalling, perform the steps in the reverse order. 8.2. P.C.B. Layout...
8.3. Disassembly Procedures Item / Part Fig. Removal (Screw, Connection, FPC & Other) Item / Part Fig. Removal (Screw, Connection, 10 Monitor P.C.B. Fig.D21 Turn the LCD Case to the arrow FPC & Other) direction so that the screws can 1 Grip Cover Unit Fig.D2 2-Screws (A)
Page 22
Fig. D7 Note for attaching Top Operation Unit • Top Operation Unit is installed and the following wire rod is a Fig. D5 thing that becomes like Fig.D8. Fig. D8 Fig. D6...
Page 23
Fig. D11 Fig. D9 Note for attaching Speaker Angle • Make sure that speaker wire is under Speaker Angle. Fig. D12 Fig. D10...
8.4. Disassembly Procedures of Camera Lens Unit The following flowchart describes order or steps for removing the Camera lens unit and certain printed circuit boards in order to make access to the item needing service. To reassemble the unit follow the steps in reverse order. Fig.
Page 28
8.4.1. How to use of CCD positioning pin (RFKZ0476)
9 Measurements and Adjustments 9.1. EEPROM Data for spare parts of the MAIN P.C.B. After replacing the MAIN P.C.B., be sure to achieve adjustment. As for Adjustment condition/procedure, consult the "Adjustment Manual" which is available in Adjustment software. The adjustment instruction is available at "Software download" on the "Support Information from NWBG/VDBG-AVC" web-site in "TSN System".
Page 30
9.2.2. Checking and repairing individual circuit boards How to use extension cables.
9.4. Electrical Adjustment • Adjustment method is different from a conventional SD video camera. • An exclusive jig and PC (including software for adjustment "tatsujin") are necessary for electric adjustment. • A USB driver for service is necessary to communication with PC. •...
Page 33
Adjustment Items • Adjustment item as follows. The adjustment instruction is available at "Software download" on the "Support Information from NWBG/VDBG-AVC" web-site in "TSN System". • How to use the software. Please reference help of the TATSUJIN software. Set-up manual for SD Video Camera 1.
10 Maintenance 10.1. Cleaning Lens and LCD Panel Do not touch the surface of the lens and LCD Panel with your hand. When cleaning the lens, use air-Blower to blow off the dust. When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the their surface. Note: A lens cleaning paper and lens cleaner are available at local camera shops and market place.
11 Factory Setting Note: The screens of the factory setting are for SDR-T71PU. For other models, refer to each screen of the factory setting. 11.1. How to turn on the factory setting? 1. Indication method of the service menu Set the mode switch " Recording"...
Page 36
11.2. What is the factory settings? The factory settings clean up and/or refresh the following settings. 1. MENU, MODE, ADJUSTMENT VALUE. 2. SD card format. 3. Reset the folder number and file number of still pictures. (Setting the folder number is 100, and file number is 0.) 4.
Page 37
SDR-T70EB SDR-S70PC SDR-S71P 7.Indication on Schematic diagrams: Circuit name being connected. Vol. 1 Colour (K)..Black Type (R)..Red Type (SDR-S70P/PC/EG/ This signal is connected OFTR (N)..Gold Type (SDR-S71GC) EF/EC/EP/EB/EE, S71P/GC/ to the FEP schematic diagram. (S)..Silver Type (SDR-S70P/PC/ GA/GN, T71PU, T76GC) S71P/GC/GA/GN/GK, T76GC) (P)..Pink Type (SDR-S71GC/GA)
S2. Voltage Chart Note) Indicated voltage values are the standard values for the unit measured by the DC electronic circuit tester (high-impedance) with the chassis taken as standard. Therefore, there may exist some errors in the voltage values, depending on the internal impedance of the DC circuit tester. S2.1.
S6. Replacement Parts List Note: 1.* Be sure to make your orders of replacement parts according to this list. 2. IMPORTANT SAFETY NOTICE Components identified with the mark have the special characteristics for safety. When replacing any of these components, use only the same type. 3.
Page 56
SDR-T70EG-K vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks R6701 ERJ2GEJ223X M.RESISTOR CH 1/16W 22K VEP02586A REAR P.C.B. 1 (RTL) E.S.D. R6702 ERJ2GEJ472X M.RESISTOR CH 1/16W 4.7K VEP21310D DC BATT OP FPC 1 (RTL) E.S.D.
Page 57
SDR-T70EG-K vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks LSEQ0874 MIC U VEP02586A REAR C.B.U 1 (RTL) E.S.D. VEP03H89J ESD PCB U (4GB) 1 (SDR-T70, T71) E.S.D. LSKF0753 REAR COVER VEP03H89K ESD PCB U (8GB) 1 (SDR-T76) E.S.D.
Page 58
SDR-T70EG-K vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks LSKM1982 LCD CASE B LSGU0776 LCD OPERATION BUTTON LSGU0776 LCD OPERATION BUTTON LSSC1107 LCD SHIELD CASE VYK4M83 LCD U VEP26326A MONITOR PCB 1 (RTL) E.S.D.
Page 59
SDR-T70EG-K vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks LSXN0061 LENS U 401-1 L6HA66NB0011 ZOOM MOTOR UNIT 401-2 L6HA66NB0012 FOCUS MOTOR UNIT 401-3 LSEM0118 AUTO IRIS UNIT VXQ1866 CCD F.C.B.A LSDW0141 CCD CASE LSFL0343 OPTICAL LPF...
Page 60
SDR-T70EG-K vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VQT3E79 1 T70EC, S70EC VPG2Q87 PACKING CASE 1 T70EG-K,EB-K,EF-K,EC-K, (FINNISH) EP-K,EE-K VQT3E80 1 T70EP, S70EP VPG2Q86 PACKING CASE 1 T70P-K,PC-K (ENGLISH/POLISH) VPG2U09 PACKING CASE 1 T71PU-K,PR-K VQT3E81...