Table of Contents
Advertisement
Recording
Check before recording
First, format the SD card if one which has been used on another device is going to be
used for the first time on this unit. (P69) When the SD card is formatted, all of the
recorded data (files) is deleted. Once the data is deleted, it cannot be restored. Copy
valuable data onto a PC or other device before proceeding with the formatting.
We recommend using MotionSD STUDIO to acquire data recorded on this unit. (P77)
Depending on the TV connected,
the sides of the images (the part
outside the dotted line) being
played may not appear. We
recommend widening the recording
range of the objects you want to
record beforehand.
1 16:9 screen
2 4:3 screen
This unit is compatible with wide-screen TVs (16:9) and set to wide mode at the time of
purchase. To watch images on normal TVs (4:3), change the wide mode setting before
recording (P44) or when playing back the images on the TV screen (P75).
∫ Basic camera holding
≥ Open the LCD monitor.
Recording cannot start when the LCD monitor
is closed. However, even if the LCD monitor is
closed during recording, the power does not
turn off until recording is ended.
≥ The angle of the LCD monitor can be adjusted
to suit what you want to record.
≥ We recommend attaching the hand strap 4
(supplied) to prevent the camera from
dropping.
≥ It is easier to hold this unit if you attach the
attachable grip 5 (supplied) to the tripod mount. (P13)
≥ Do not cover the white balance sensor 3 with your fingers, etc.
≥ Do not cover the lens, the front of the flash 1 or the built-in stereo microphone 2
with your fingers.
The clock is not set at the time of purchase. If the screen shows the incorrect date/
time, then adjust it.
34
VQT0X49
1
15:42
15:42
15.12.2006
15.12.2006
16:9
1
5
2
15:42
15:42
15.12.2006
15.12.2006
4:3
2
3
4
Advertisement
Table of Contents
