iBall Baton iB-WRC300N User Manual page 64

IV. Turn off the 300 MIMO ADSL2+ Broadband Router and the client, then restart
it and then turn on the client again.
V. Ensure that the LEDs are indicating normally. If not, make sure that the power
and Ethernet cables are firmly connected.
VI. Ensure that the IP Address, subnet mask, gateway and DNS settings are
correctly entered for the network.
VII. If you are using other wireless device, home security systems or ceiling fans,
lights in your home, your wireless connection may degrade dramatically. Keep
your product away from electrical devices that generate RF noise such as
microwaves, monitors, electric motors...
B. What can I do if my wireless client can not access the Internet?
I. Out of range: Put the router closer to your client.
II. Wrong SSID or Encryption Key: Check the SSID or Encryption setting.
III. Connect with wrong AP: Ensure that the client is connected with the correct
Access Point.
i. Right-click on the Local Area Connection icon in the taskbar.
ii. Select View Available Wireless Networks in Wireless Configure. Ensure
you have selected the correct available network.
iii.
Reset the 300M MIMO ADSL2+ Broadband Router to default setting
C. Why does my wireless connection keep dropping?
I. Antenna Orientation.
i. Try different antenna orientations for the 300M MIMO ADSL2+ Broadband
Router.
ii. Try to keep the antenna at least 6 inches away from the wall or other
objects.
II. Try changing the channel on the Router and your Access Point and Wireless
adapter to a different channel to avoid interference.
64