Table of Contents
Advertisement
9.
Data Encapsulation: Vc-MUX and LLC, these two options depend on your
ISP setting. (LLC is default as configured)
10. VPI and VCI, Schedule Type: these values depend on your ISP setting.
11. Schedule type: UBR / CBR / VBR / GFR, depend on your ISP setting.
12. Multicast: you may enable as auto mode or select by IGMP v1, IGMP v2, and
IGMP v3.
13. IGMP Snooping: enable or disable IGMP snooping function.
14. VLAN TAG: you may input the value of VLAN Tag by your ISP setting.
(Range : 1~4094)
Ethernet WAN
A. Dynamic IP Address
1.
Activate WAN for Auto-Failover: With this function enabled, when the
2.
Host Name: Optional, required by some ISPs, for example, iB-WRC300N.
3.
ISP registered MAC Address: Enter MAC address of your ISP. (Optional)
4.
Connection Control: Connect-on-demand is the device will link up with ISP
when the clients send outgoing packets. Auto Reconnect (Always-on) is the
device will link with ISP until the connection is established. Manually mode is
the device will not make the link until someone clicks the connect-button in the
Status-page.
31
Hide quick links:
Advertisement
Table of Contents
