Table of Contents
Advertisement
clients send outgoing packets. Auto Reconnect (Always-on) is the device will link with
ISP until the connection is established. Manually mode is the device will not make the
link until someone clicks the connect-button in the Status-page.
6. Maximum Transmission Unit (MTU): Most ISP offers MTU value to users. The
default MTU value is 0 (auto).
7. MPPE (Microsoft Point-to-Point Encryption): enable or disable this function.
8. Multicast: you may enable as auto mode or select by IGMP v1, IGMP v2, IGMP v3.
9. IGMP Snooping: enable or disable IGMP snooping function.
10. VLAN TAG: you may input the value of VLAN Tag by your ISP setting. (Range :
1~4094)
E. L2TP
1. IP Mode: Please check the IP mode your ISP assigned, and select "Static IP Address"
or "Dynamic IP Address".
2. My IP Address and My Subnet Mask: The private IP address and subnet mask your
ISP assigned to you.
3. Gateway IP and Server IP Address/Name: The IP address of the L2TP server and
designated Gateway provided by your ISP.
35
Hide quick links:
Advertisement
Table of Contents
