iBall Baton iB-WRC300N User Manual page 32

5. NAT disable: If you enable this option, it will act with a non-NAT function.
6. Multicast: you may enable as auto mode or select by IGMP v1, IGMP v2, and
IGMP v3.
7. IGMP Snooping: enable or disable IGMP snooping function.
8. VLAN TAG: you may input the value of VLAN Tag by your ISP setting.
(Range : 1~4094)
B. Static IP Address
1. WAN assigned IP address/ Subnet mask/ Gateway IP.
2. Primary DNS/ Secondary DNS: Input the Primary/Secondary DNS if
necessary.
3. NAT: If you enable this option, it will act with a NAT function.
4. NAT disable: If you enable this option, it will act with a non-NAT function.
5. Multicast: you may enable as auto mode or select by IGMP v1, IGMP v2, and
IGMP v3.
6. IGMP Snooping: enable or disable IGMP snooping function.
32