1.
Cross-layer QoS: you can enable/disable this QoS system.
2.
QoS Mode : you can select User defined QoS rule for your own QoS control
3.
Bandwidth of upstream / bandwidth of Downstream : you can input the value of
maximize of upstream and downstream bandwidth from your ISP
Advance setting: you can press the button of 'Add New Rule' to create a new QoS
4.
rule.
5.
Create a QoS Rule : you can enable the rule, and select QoS class type as below.
Class: You can create your own QoS rule by different classes as below.
Function: you can set your own function value to enable your QoS rule as below.
Function
PRI
MAXR
Class
Description
IP
IP address base
N
TCP port
UDP PORT UDP port
MAC
MAC base
DSCP
DSCP base
Description
Priority
Maximum bandwidth Rate
Data
1~6
KBps/MBps
54