Setting Up - BT 300 User Manual

Setting up

Parent unit
1. Plug one of the power adapter cables into the
socket marked
plug the other end into the mains power wall socket
and switch the power on.
2. Activate the batteries by pulling the plastic tab
away from the top of the Parent unit and leave to
charge for 24 hours to reach maximum charge.
24
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
2250 Baby Monitor 300 UG Iss2.[2].indd 9
on the side of the Parent unit and
WARNING!
Only use the power adapters
supplied. Using incorrect power
adapters may permanently
damage your product.
Battery performance
Rechargeable batteries
in the Parent unit will last
approximately 16 hours during
normal operation or 20 hours
when Mute is switched on.
Please note that new batteries
do not reach full capacity until
they have been in normal use
for several days.
The charge capacity of
rechargeable batteries will
reduce with time as they
wear out, so reducing the
performance time of the Parent
unit. Eventually they will need
to be replaced. New batteries
can be obtained from the
BT Digital Baby Monitor 300
Helpline on 0800 145 6789*.
The Parent unit rechargeable
batteries will lose charge over
a period of time, even if
switched off.
9
10/04/2014 11:06