Help - BT 300 User Manual

Help

Helpline
If you have any problems using
your BT Digital Baby Monitor 300,
call 0800 145 6789*.
Parent unit is beeping
Please see page 17 for the list of
tones the Parent unit makes.
The Parent unit will beep for a
number of reasons:
• The link has been lost between
your units, see page 11. Check
that the Baby unit Link indicator is
illuminated. If not, please ensure
that the power adapter is still
connected and if this still does not
switch on, please test into a different
electrical socket.
• The crying alert is switched on, see
page 14.
• The batteries are low, see pages 9-10.
• The Find button has been pressed on
the Baby unit, see page 16.
If the Parent unit still beeps after
checking the above, please try
switching the Baby unit off at the
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
2250 Baby Monitor 300 UG Iss2.[2].indd 19
power and removing the batteries for
approximately 30 minutes. Ensure
the Parent unit is clean by wiping
with a damp cloth. If the problem
persists call the Helpline for advice.
Link indicator does not come on
• Check that both the Baby and Parent
units are switched on.
• Check that the batteries in the Parent
unit are correctly installed and that
they are charged.
• Check that the units are within range
of each other.
• Check that the mains power is
plugged in and switched on at the
Baby unit.
Link light is flashing green
• If you have pressed
the Talk Back feature, the Link
light will flash to indicate one-way
communication between the units.
• The units are searching for a
communication link.
19
to use
10/04/2014 11:06