Setting Up; Parent Unit - BT Digital Baby Monitor 350 Lightshow User Manual

Setting up

Parent unit

1. Plug one of the power adapter cables into the
socket marked
charger and plug the other end into the mains
power wall socket and switch the power on.
2. Activate the batteries by pulling the plastic tab
away from the back of the Parent unit.
24
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
2292 Baby Monitor 350 UG [4].indd 13
on the back of the Parent unit
WARNING!
Only use the power adapters
supplied. Using incorrect power
adapters may permanently
damage your product.
Battery performance
Rechargeable batteries
in the Parent unit will last
approximately 20 hours in
normal use. Please note that
new batteries do not reach full
capacity until they have been in
normal use for several days.
The charge capacity of
rechargeable batteries will
reduce with time as they
wear out, so reducing the
performance time of the Parent
unit. Eventually they will need
to be replaced. New batteries
can be obtained from the
BT Digital Baby Monitor 350
Lightshow Helpline on
0800 145 6789*.
13
17/06/2014 14:10