Rear Shock Absorbers; Loading And Unloading Cargo - Club Car XRT 950 4x2 Owner's Manual

1
1. Locking Pin 2. Bed Locking Pin Holes
k-00221
Figure 16 Bed Locking Pin

REAR SHOCK ABSORBERS

The vehicle arrives from the factory with the rear coil-over shocks pre-adjusted for optimum vehicle performance.
CAUTION
• Do not adjust the rear shock absorbers. Damage to the shock absorbers could result.

LOADING AND UNLOADING CARGO

WARNING
• Engage park brake before loading vehicle.
• Do not allow riders in the cargo bed.
• Reduce vehicle load and speed when driving up or down slopes or on uneven terrain.
• Reduce speed and avoid sudden stops when backing up. Failure to do so may cause the vehicle
to overturn or flip over backwards.
• Do not exceed rated vehicle capacity. Rated capacity is for level surfaces only.
• Overloading can affect vehicle handling or cause component failure, resulting in loss of control of
vehicle and possible severe personal injury or death.
• Do not load tailgate. The tailgate should be in the upright position and latched securely while the
vehicle is in motion.
• To help avoid shifting vehicle load and possibly overturning the vehicle, avoid sudden starts, sudden
stops and abrupt turns. Make sure cargo is well secured.
WARNING CONTINUED ON NEXT PAGE
2
XRT 950 Gasoline Vehicle Owner's Manual
Rear Shock Absorbers
Page 29