Search Tuning - Roberts R9917 User Manual

Operating your radio - search tuning
1. Switch on your radio by pressing the Power
button.
2. Select the required waveband by repeat
pressing of the Band button. The
waveband selected will appear in the
display. On FM fully extend the Telescopic
aerial. On MW and LW rotate your radio for
best reception.
3. Press and hold down either the Tuning +
or - buttons until the frequency in the
display begins to change rapidly. Release
the button.
4. Your radio will scan the selected waveband,
stopping each time it finds a station of
sufficient strength. Adjust the Volume
control to the required level.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
16