Warning - Nikon SMZ745T Instructions Manual

WARNING

1. Intended use of this product
This product is intended only for microscopy. Do not use it for any
other purposes.
2. Do not disassemble.
Disassembling this product may result in electric shock or
malfunction. Do not disassemble any part that is not indicated in
this manual. If you experience problems with the product, please
contact your nearest Nikon representative.
3. Read the instructions thoroughly.
To ensure safety, thoroughly read this manual and the manuals for
other equipment to be used with this product. In particular, be sure
to follow the warnings and cautions at the beginning of the manuals.
4. Check the input voltage
When using an illuminator, check that the input voltage displayed
on the power supply of the illuminator matches the operating
voltage. Please contact your nearest Nikon representative if the
displayed voltage does not match the operating voltage. Use of an
improperly matched illuminator may result in damage to the
equipment.
5. Cautions on the power cord
The power supply is necessary for using the halogen illuminators,
which are accessories. Follow the cautions below for the power
cord.
• To prevent electric shock, turn off the power switch on the power
supply before connecting or disconnecting the power cord.
• For the power supply TN-PSE30W A (for regions with 230 V
power only), the power code is specified. Be sure to use the
specified power cord for the power supply. Use of other power
cords may result in malfunction, overheat, or fire.
(Refer to Power Supply TN-PSE30W A (for regions with 230
V power only) on p.22.)
3