Nikon SMZ745T Instructions Manual page 21

Attaching to the stand (for G-LS only)
2
Align the protrusion on the lamphouse with
the inside of the screw hole on the arm of the
stand (screw hole for mounting 6V10W
halogen illuminator), then insert the mounting
screw from the outside of the arm and secure
it.
Attaching to the stand with arm for halogen illuminator
3
Special arms are provided to be attached to the stand. By using these arms,
the direction of illumination can be controlled easily.
1 G-EIA flexible arm (for G-LS only)
Align the protrusion on the lamphouse
with the inside of the holder of the
flexible arm, then insert the mounting
screw from the outside of the holder and
secure it.
Secure the other end of flexible arm to
the left or right screw hole (for
mounting an arm for halogen
illuminator) on the arm of the stand by
the mounting screw supplied with the
flexible arm.
Using Accessories
G-LS
Mounting
screw
Screw hole for
mounting 6V10W
halogen illuminator
G-LS
Protru-
sion
Flexible
arm
Holder Mounting screw
Flexible arm
Mounting screw
IV
19