The head should be locked for transportation- the tilt lock button (7) is pushed and the pan lock/unlock lever
(2) is in locked position. To unlock the head, press the tilt unlock button (6) and move the pan lock/unlock lever
(2) into unlocked position.
3. Description of the device
5
1 - Front lens
2 - Pan lock
3 - Base
4 - Handle
5 - Head yoke
6 - Tilt unlock button (green)
7 - Tilt lock button (red)
8 - Moving head
Rear panel of the base:
1 - Power switch
2 - Fuse holder-live
3 - Power cord
4 - Fuse holder-neutral
5 - 5-pin DMX output
6 - 5-pin DMX input
7 - 3-pin DMX output
8 - 3-pin DMX input
9 - RJ 45 connector
Front panel of the base:
1 - Ethernet indicator
2 - Display
3 - Infra-red sensor
4 - Data transfer indicator
5 - RNS control wheel
6 - Escape button
7 - Enter button