Table of Contents
Advertisement
Ⅲ INSTALLATION INSTRUCTIONS
3.1 Installation Precautions
Notes for Installation
1.
The unit installation work must be done by qualified personnel according to the local rules and this
manual
2.
When removing the unit to the other place, please firstly contact with the local maintenance center.
3.1.1 Basic Requirements for Installation Location
1.
Installation at the following places may cause failure of the air conditioner. Please contact
installation and service agency if the installation t such places cannot be avoided.
2.
Choose a place far away from heat source, steam and inflammable gases.
3.
A place with high frequency facilities, such as radio equipment, electric welder or medical
equipment;
4.
A region with saline-sodic soil near the sea;
5.
A place full of machine oil
6.
A place with sulphide gases (such as sulphur spring);
7.
An environment with special conditions.
3.1.2 Installation Location of Indoor Unit
1.
select a place ,avoid the inflammable gas produce or leakage.
2.
Select a place avoid the water vapor or oil spayed on the unit.
3.
Ensure that airflow can reach every corner of the room.
4.
Choose a place so that the connection pipe could be easily pulled out.
5.
Select the place where the airflow f the unit can not be blocked.
6.
Select the position where the few outer air influenced.
7.
Select the firm and flat ground.
8.
Ensure sufficient clearance and space for service and maintenance.
9.
Ensure the installation of indoor unit is in conformity with the requirements of installation
dimension drawing;
10. Do not use the unit in the immediate surroundings of a laundry a bath a shower or a swimming
pool.
11. A location from which the condensation water can be drained out conveniently.
3
Advertisement
Table of Contents
