Installation Instructions; Installation Of Indoor Unit - Toyotomi MUL-E09CON Owner's Manual

Console type air conditioner

Hide thumbs

Table Of Contents

Table of Contents

Installation of indoor unit

SELECTION OF INSTALLATION LOCATION.

Such a place where cool air can be distributed

throughout the room.

Such a place where condensation water is easily

drained out.

Such a place that can handle the weight of indoor unit.

Such a place which has easy access for maintenance.

The appliance shall not be installed in the laundry.

THERE ARE 2 STYLES OF INSTALLATION.

CEILING TYPE

FLOOR TYPE

Each type is similar to the other as follows;

Indoor unit

The indoor unit should be sited in a place where:

1) the restrictions on installation specified in the indoor

unit installation drawings are met.

2) both air intake and exhaust have clear paths met.

3) the unit is not in the path of direct sunlight.

4) the unit is away from the source of heat or steam.

5) there is no source of machine oil vapour (this may

shorten indoor unit life).

6) cool(warm) air is circulated throughout the room.

7) the unit is away from electronic ignition type fluorwscent lamps

(inverter or rapid stert type) as they may shorten the remote

controller range.

8) the unit is at least 1 metre away from any television or radio

set(unit may cause interference with the picture or sound).

CAUTIONS FOR INSTALLATION WHERE

AIR CONDITIONER TROUBLEIS LIABLE

TOOCCUR.

Where there is too much of oil area.

Where it is acid base area.

Where there is irregular electrical supply.

Indoor Unit Installatio n Drawings

The indoor unit may be mounted in any of the three styles shown here.

Exposed

Mounting plate

Molding

Floor lnstallation

Location for securing the installation panel.

Schematic drawing of hooks:

or more