Guides For General Operation; Introduction For Special Functions - Toyotomi TGS-71FSA-E Installation And Operation Manual

5.3 Guides for General Operation

① Press ON/OFF button to start the unit after powering the main unit on.(Note: Power the unit on
every time, the big -guide louver and small-guide louver will be closed firstly.)
②
Press MODE button to select desired running mode.
③ Press +/ - button to set the desired temperature. (It is unnecessary to set the temperature at AUTO
mode)
④
Press FAN button to set fan speed, the AUTO FAN, LOW, MID or HIGH could be selected.
⑤ Press button and
①
Press SLEEP button, set the sleep mode.
② Press TIMER button, then press +/- button, to set the scheduled timer on or timer off.
③ Press LIGHT button to control displayer light on or off.
④
Press BLOW button to set Blow function on or off.
⑤
Press TURBO button to set this function on or off.

5.4 Introduction for Special Functions

5.4.1 About blow function
This function aims to dry the moisture inside the evaporator of the indoor unit to avoid mould.
button to set swing mode.
14