Table of Contents
Advertisement
MENU INFORMATION
User numeric key
3. New Password:
4. Confirm Password: Input the new password once again. Confirm password must
be the same as the New password. System will inform you "
" while they are the same, or inform you to input the password of Confirm
cessfully!
password once again when they are not the same.
3.6 OSD Setting
1. Subtitle Display: Press
2. OSD Timeout: Press
keys toselect from 1 to 10 by step1. The default
values Is 5.
3. OSD Transparency: Press
40%. The default option is Off.
3.7 Favorite
There are 32 favorites group
listed in this window. Press
PR+, PR- keys to select one
and press OK key to the Re-
name window. Since the same
operation as the above the
Add Satellite window, here we
don't explain any more.
3.8 Other
1. LNB Power: Select between Off and On.
2. Channel Play Type: Select among All, Free, Scramble.
3. Channel Change: Select between Freeze and Black screen.
4. Beeper: Select between Off and On.
to input the new password.
(0-9)
Change password suc-
keys to select between On and Off.
keys to select among Off, 10%, 20%, 30%,
4. Tools
1. Press OK key or
key to
pop up the "Input Password"
dialogue, you can not enter
into the menu unless the co-
rrect password is inputted.
The default password is
0000
2. Press PR+, PR- keys to
move the cursor up or down.
3. Press EXIT key or
key to move the focus to the left menu.
4. 1 Information
Press OK key to the Information window.
4.2 Factory Setting
Press OK key to enter into the Factory Setting window.
Select Yes button and press OK key to return to the factory setting. All searched
channels and set information will be erased.
Select No button and press OK key to cancel this operation, or press MENU or
EXIT key to cancel and exit.
4.3 SatcoDX Auto Programing
Press OK key at the Start button to start receiving date from RS232 for 10 se-
conds.
4.4 Upgrade Rs232
1. Press
keys to select among allcode, maincode, card,Radioback,keydate
defaultdb, userdb. The default option is allcode.
2. Press OK key at the Start button to start checking serial port.
15
.
Advertisement
Table of Contents
