NPG DSR 409 A User Manual page 18

Digital satellite receiver
Table of Contents

Advertisement

TROUBLE SHOOTING
Problem
Possible causes
The satellite dish is
not pointing at the
satellite.
Signal is too strong. Connect a signal attenuator to the
Bad picture / blocking
error.
Satellite dish is too
small.
LNB noise factor
too high.
The LNB is faulty. Change the LNB.
The picture is not sho-
The system is con-
wed on the screen,
nected by RF
when switching on.
leads.
The system is con-
nected by RF leads
There is interference
and the output
on your digital satellite
channel of the re-
channels, an existing te-
ceiver interferes
rrestrial channel or
with an existing te-
video signal.
rrestrial channels
or Video signal.
Battery exhausted. Change the batteries.
The RCU is not working.
RCU is incorrectly
aimed.
If you have tried all of the actions suggested above, without solving the pro-
Note :
blem, please contact your dealer or service provider.
What to do
Adjust the dish.
LNB input.
Change to a larger dish.
Change to an LNB with lower noise
factor.
Check the UHF channel fixed in
your system and tune the UHF
channel properly.
Change the receiver output chan-
nel to a more suitable channel, or
connect the system by SCART
leads.
Aim RCU at the receiver, or check
that nothing blocks the front panel.
This symbol on the product or in the instructions means that
your electrical and electronic equipment should be disposed at
the end of life separately from your household waste.There are
separate collection systems for recycling in the EU.For more in-
formation,please contact the local authority or your retailer
where you purchased the product ..
Personal Grand Technology S.A.reserves the right to change
specifications and / or functions of its products without notice in
order to improve technically.
Personal Grand Technology, S.A.
Pol. Ind. De las Monjas C/ Ecuador, 14 28850 Torrejón de Ardoz-Madrid (Spain)
Tel.: 902 931 457
sat@npgtech.com
18
www.npgtech.com

Advertisement

Table of Contents
loading

Table of Contents