Table of Contents
Advertisement
MENU INFORMATION
2.6 TP List
1. Press PR+,PR- keys to select the proper satellite.
2. Press red colour key to pop up the Edit TP window.
Frequency, Symbol rate: Press
keys to add or reduce
by step one. Or press numeric
keys (0-9) to input the desired
value. The range of the fre-
quency is 3000-13450, while
the range of the symbol rate is
1000~45000. The inputted
value is beyond this range, the
value will return to the origin
value.
Polarity: Press
keys to switch between Vertical and Horizontal.
3. Press green colour key to pop up the Add TP window. Since the same operation
as the above Edit TP window, here we don't explain any more.
4. Press yellow colour key to pop up dialogue " Are you sure to delete?". Press OK
key at the Yes button to delete the selected TP, or press EXIT key to cancel the ope-
ration.
5. Press blue colour key to pop
up the TP Search window.
FTA only, Scan Channel, Net-
work Search:
Press
keys to select
the proper option.
Press OK key at the OK button
to start searching.
3. System Setup
1. Press OK key or
key to move the cursor to the right menu.
2. Press PR+, PR- keys to move the cursor up or down.
3. Press EXIT key or
key to move the focus to the left menu.
3. 1 Language
1. Press OK key to enter into
the Language window. Press
keys to select the lan-
guage in circle, while press
PR+, PR- keys to move the cur-
sor up or down in circle.
2. Press MENU key or EXIT key
to save and exit.
3. The types of the language, pleaser refer to the configuration of the customer.
3.2 TV System
Press PR+, PR- key to move the cursor up or down, while press
change the setting and the setting will take effect immediately.
1. Display Mode: Select among Auto,PAL, PAL-M, PAL-N, NTSC.
2. Aspect Mode: Select among 4:3 LetterBox, 4:3PanScan, 16:9.
3. Video Output: Select between RGB and CVBS.If you select the mode of RGB,the
VCR Loopthrough will turn grey below.
4. RF System,RF Channel: PAL:21~29,NTSC:14~83
13
keys to
Advertisement
Table of Contents
