Table of Contents
Advertisement
MENU INFORMATION
2. 1 Antenna Connection
Press
keys to select
between Motor Antenna and
Fixed Antenna.
2.2 Satellite List
1. Press PR+, PR- keys to select the satellite up or down. Press OK key to select
and mark, and you can press
OK key again to cancel the se-
lection and the mark.
2. If there is no satellite, the
red colour and blue colour
keys will be invalid.
3. Press red colour key to pop
up the Edit Satellite window.
Press PR+, PR- keys to move
cursor up or down.
Name: User numeric keys to change the name of the satellite, please refer to the
Edit Channel Name.
Longitude: You can press
longitude. After pressing OK key, you can use numeric keys to edit the longitude,
press EXIT key or the PR+, PR- keys to exit editing mode. The range of the longitude
is from 1 to 180 degree. If beyond this range, system will inform you "out of range"
when you press yellow colour key on the RCU.
keys to switch between east longitude and west
After setting, press yellow colour key
to save and exit, while press blue co-
lour key to exit vwithout saving.
4. Press green colour key to pop up
the Add Satellite window. Since the
same operation as the above Edit Sa-
tellite window, here we don't explain
any more.
5. Press blue colour key to pop up the dialogue "Are you sure to delete?". Select
Yes button and press OK key to delete the selected satellite. You can cancel this
operation by pressing OK key at the NO button.
10
Advertisement
Table of Contents
