Table of Contents
Advertisement
3. New Password: User numeric key (0-9) to input the new password.
4. Confirm Password: Input the new password once again. Confirm password must
be the same as the New password. System will inform you "Change password suc-
cessfully!" while they are the same, or inform you to input the password of Confirm
password once again when they are not the same.
3.7 OSD Setting
1. OSD Timeout: Press
keys toselect
from 1 to 10 by step1. The default values Is
5.
2. OSD Transparency: Press
lect among Off, 10%, 20%, 30%, 40%. The de-
fault option is Off.
Press MENU or EXIT key to save and exit.
3.8 Favorite
There are 32 favorites group listed in this win-
dow. Press PR+, PR- keys to select one and
press OK key to the Rename window. Since the
same operation as the above the Add Satellite
window, here we don't explain any more.
3.9 Other
1. LNB Power, LNB Power2: Select between Off and On.
2. Channel Play Type: Select among All, Free, Scramble.
3. Channel Change: Select between Black Screen and Freeze.
4. Clock in Standby: Select between Off and On.
5. Auto Standby: Select between Off and On.
4. Tools
1. Press OK key or
key to pop up the "Input Password" dialogue, you can not
enter into the menu unless the correct password is inputted. The default password
is 0000.
2. Press PR+, PR- keys to move the cursor up or down.
3. Press EXIT key or
key to move the focus to the left menu.
keys to se-
4. 1 Information
Press OK key to the Information window.
4.2 Factory Setting
Press OK key to enter into the Factory Setting
window.
Select Yes button and press OK key to return
to the factory setting. All searched channels
and set information will be erased.
Select No button and press OK key to cancel
this operation, or press MENU or EXIT key to
cancel and exit.
4.3 Upgrade by USB
1.Upgrade File: Show the Upgrade File.
2.Upgrade Mode: Select among Allcode+bootloader, HS11, maincode, radioback,
combo, seeback, data1, data2, defaultdb, userdb and Dump. When users switch
the upgrade mode, ¡Upgrade File¡ will show the corresponding file according to the
table below:
Upgrade Mode
File feature
All code :
File named as "*.abs"
Main Code:
Fichier *.bin
Radio back:
File named as "*.abs",
the picture will be used
as both radio back and
menu back
Default db:
File named as "*.abs"
Select the upgrade mode and upgrade file, then you can start upgrade by USB.
3.Press OK key on start button to start receiving the data from USB device.
When the USB device is not connected, this item is grey, you can not edit it now.
DHTS 4022A
ENGLISH
13
Advertisement
Table of Contents
