Mute; Pause; Audio; Recall - NPG DSR 409 A User Manual

MENU INFORMATION

6.8 Mute

Press key to close the volume. You can press
the volume, or press keys to open the volume.
use
6.9 Pa
During the viewing, you can press PAUSE key to stop the picture while the volume
continues. You can play the picture by pressing PAUSE key once again.
6. 1 0 OK
1. During the viewing or listening, press OK key to pop up
the TV program list or the Radio program list.
2. Press PR+, PR- keys to select the channel up or down,
and then press OK key to play this channel in full-screen.
3. Press keys to select the satellite.
4. Press MENU or EXIT key to close this window.

6. 1 1 Audio

1. Press keys to enter into the Audio window.
2. Press keys to select among Left, Right, Stereo,
and Mono.
3. Changing the audio mode is only connected with the
current channel, not all the channels.
4. Press MENU or EXIT key to close this window.

6. 1 2 Recall

Press PR key to switch the current channel to the previous channel.

6. 1 3 FAV

1. Press FAV key to pop up the favourite group window.
2. Press
key once again to restore the channel up or down.. Press OK key at the selected channel to view it in full-
screen. Press MENU or EXIT key to exit.
3. If there is no favorite channel, system will inform " No FAV Channel!" when you
press FAV key.

6. 1 4 Teletext

Press TXT keys to open the teletext on the screen. If there is no teletext, system
will inform "No Teletext Data". Press EXIT key to exit.

6. 1 5 Zoom

1. Press ZOOM key to switch among Zoom*1, Zoom*2, Zoom*4, Zoom*6,
Zoom*8, Zoom*12, Zoom*16.
2. In zoom mode, press PR+, PR-
down.
3. Press MENU or EXIT key to exit

TROUBLE SHOOTING

Problem
The display on the front
panel does not light up. Main cable is not
No sound or picture,
but the front panel
shows red light.
No sound or picture.
17
keys to select the favorite group. Press PR+, PR- keys to select
keys to move the cursor up, left, right,
Possible causes What to do
Check that the main cable is plug-
ged into
connected.
the power socket.
The receiver is in
Press the standby button.
standby mode.
The satellite dish is
Adjust the dish. Check the signal
not pointing at the
level in the Antenna Setup menu.
satellite.
Check the cable connections, LNB
and other equipment connected
No signal or weak
signal. between the LNB and the receiver,
or adjust the dish.