Table of Contents
Advertisement
MENU INFORMATION
key to go to reference. If you select Disable Limit in the
Go to Reference:
OK
Press
above Limit Setup item, this button will turn grey.
6. If select USALS, Delete All item will turn grey.
: Press
Local Longitude, Local Latitude
East, or press
keys to switch between North and South. Press
enter into the editing mode.
Use numeric keys
to
(0-9)
input the longitude or latitude,
press
key or
key to
MENU
EXIT
exit. The range of the longitude
is from 0 to 180,while the
range of the latitude is from 0
to 90. If the inputted value is
not in this range, system will
pop up a dialogue "Our of Range" when exit from this window. You can press OK
key to close this dialogue.
: Press
key to enter into the
7. Motor Setting
OK
: Press
Satellite, Transponder
press
key to pop up the drop-down list and select in the list.
OK
2.4 Single Satellite Search
: Press
keys to select the satellite in circle. Or press
1. Satellite
pop up the drop-down list, then select the desired satellite in the list and press
key to confirm.
: Press
keys
2. FTA Only
to select between Yes and No.
: Press
3. Scan Channel
keys
to select among
TV+Radio, TV Channel
keys to switch between West and
OK
window.
Motor setting
keys to select satellite or transponder, or
OK
Select between
4. Network Search:
No and Yes. This item turns grey
when Auto Scan is selected in the fo-
llowing Scan mode item.
Press
5. Scan Mode:
key to
to select between Auto Scan and
Preset Scan. Auto Scan is Blind
scan, while Preset Scan is to search
the preset frequencies.
: Press
key to start searching.
6. Search
OK
2.5 Multi Satellite Search
From the Multi Satellite Se-
arch window, you can search
several satellites at the one
time.
All selected satelli-
1. Satellite:
tes in the satellite list window
are displayed on the down
part. You can press
Press
2. FTA Only:
key to
Press
3. Scan Channel:
Radio.
OK
Select between No and Yes. This item turns grey when Auto
4. Network Search:
Scan is selected in the following Scan mode item.
Press
5. Scan Mode:
Auto Scan is Blind scan, while Preset Scan is to search the preset frequencies.
Press OK key to start searching.
6. Search:
12
keys
keys to switch among them.
keys to select between Yes and No.
keys to select among TV + Radio, TV Channel,
keys to select between Auto Scan and Preset Scan.
Advertisement
Table of Contents
