Table of Contents
Advertisement
2.6 TP List
1. Press PR+,PR- keys to select the proper sa-
tellite.
2. Press red colour key to pop up the Edit TP
window.
Frequency, Symbol rate: Press
add or reduce by step one. Or press numeric
keys (0-9) to input the desired value. The
range of the frequency is 3000-13500, while
the range of the symbol rate is 1000~45000. The inputted value is beyond this
range, the value will return to the origin value.
Polarity: Press
keys to switch
between Vertical and Horizontal.
3. Press green colour key to pop up
the Add TP window. Since the same
operation as the above Edit TP win-
dow, here we don't explain any more.
4. Press yellow colour key to pop up dialogue "
Are you sure to delete?". Press OK key at the
Yes button to delete the selected TP, or press
EXIT key to cancel the operation.
5. Press blue colour key to pop up the
TP Search window.
FTA only, Scan Channel, Network Se-
arch: Press
keys to select the
proper option.
Press OK key at the OK button to
start searching.
keys to
2.7 Terrestrial Automatic Scan
1. Area: Select the area.
2. FTA Only: Select between YES and No.
3. Search: Press OK key to start sear-
ching.
2.8 Terrestrial Manual Scan
When you enter Manual Search, the screen will display as beside.
There are two scan modes for you. You can choose to scan by channel or by fre-
quency.
When scan band is UHF and region is
"China", the range of Ch Number is from
13 to 61. When scan band is VHF and re-
gion is "China", the range of Ch Number
is from 1 to 12. (It's according to region.)
When you complete your configuration,
move highlight to search option, and
press [OK] key to start scanning.
Press [EXIT] key to exit the scanning and
save the current parameters.
3. System Setup
1. Press OK key or
key to move the cursor to the right menu.
2. Press PR+, PR- keys to move the cursor up or down.
3. Press EXIT key or
key to move the focus to the left menu.
3. 1 Language
1. Press OK key to enter into the Language
window. Press
keys to select the lan-
guage in circle, while press PR+, PR- keys to
move the cursor up or down in circle.
2. Press MENU key or EXIT key to save
and exit.
3. The types of the language, pleaser
refer to the configuration of the custo-
mer.
DHTS 4022A
ENGLISH
11
Advertisement
Table of Contents
